Diablo D1060N 10" x 60-Teeth Saw Blade for Thick Aluminum
MPN: D1060N
Minimum order quantity is .
Meet the Diablo D1060N 10" x 60-Teeth Saw Blade for Thick Aluminum—engineered to deliver precise, burr-free cuts in non-ferrous metals while standing up to on-the-job impact. This is the blade you reach for when aluminum needs clean edges and dependable durability, from aluminum extrusions to copper pipe and brass plate.
Precision cutting designed for aluminum thickness variety
Optimized for a broad range of aluminum thicknesses, the D1060N excels from thin (up to 1/8") to medium (3/32"–1/4") and thick (3/16"–7/16") profiles. The geometry and tooth arrangement are tuned to reduce binding and chatter, so you can push through profiles with confidence and minimal rework.
Advanced carbide technology for lasting performance
Featuring Diablo’s TiCo™ Super-Density Micro-Grain Carbide, this blade resists impact and wear far better than standard metal-cutting carbide. The result is longer blade life, sustained cutting efficiency, and lower replacement costs on demanding aluminum projects.
Clean, burr-free finishes with every pass
Equipped with a Triple Chip Grind (TCG) tooth design, the D1060N delivers smooth, burr-free edges that reduce or eliminate post-cut deburring. That means faster setup, less material handling, and tighter tolerances for precision assemblies.
Rock-solid durability in tough material cuts
Tri-Metal Shock Resistant Brazing bonds the carbide teeth securely to the blade body, absorbing impacts and preventing tooth lift under heavy cuts. This translates to consistent performance even when cutting through harder aluminum sections or encountering fixtures and fasteners.
Versatility for cordless and corded saws
Whether you’re wired to the shop or cutting on-site with a cordless saw, the D1060N is built to perform. Its 10" diameter paired with 60 teeth provides the balance of speed and control needed for non-ferrous metal work, without sacrificing edge quality.
Ideal use cases and practical tips
- Fabrication shops and field crews cutting aluminum extrusions, copper pipe, and brass plate—where clean edges and minimal rework matter most.
- Prototyping and tight-tolerance builds that require dependable edge quality without advanced deburring steps.
- Projects that demand consistent performance across a range of thicknesses, from thin skins to thicker profiles.
- For best results, maintain a steady feed rate and avoid forcing the blade; let the teeth do the work to minimize heat buildup and edge chatter.
With the Diablo D1060N, you gain a specialized aluminum-cutting blade that prioritizes precision, durability, and efficiency. It’s the smart choice when you need dependable, burr-free cuts on aluminum and other non-ferrous metals—and you want a blade that lasts through demanding jobs while preserving tight tolerances.
Meet the Diablo D1060N 10" x 60-Teeth Saw Blade for Thick Aluminum—engineered to deliver precise, burr-free cuts in non-ferrous metals while standing up to on-the-job impact. This is the blade you reach for when aluminum needs clean edges and dependable durability, from aluminum extrusions to copper pipe and brass plate.
Precision cutting designed for aluminum thickness variety
Optimized for a broad range of aluminum thicknesses, the D1060N excels from thin (up to 1/8") to medium (3/32"–1/4") and thick (3/16"–7/16") profiles. The geometry and tooth arrangement are tuned to reduce binding and chatter, so you can push through profiles with confidence and minimal rework.
Advanced carbide technology for lasting performance
Featuring Diablo’s TiCo™ Super-Density Micro-Grain Carbide, this blade resists impact and wear far better than standard metal-cutting carbide. The result is longer blade life, sustained cutting efficiency, and lower replacement costs on demanding aluminum projects.
Clean, burr-free finishes with every pass
Equipped with a Triple Chip Grind (TCG) tooth design, the D1060N delivers smooth, burr-free edges that reduce or eliminate post-cut deburring. That means faster setup, less material handling, and tighter tolerances for precision assemblies.
Rock-solid durability in tough material cuts
Tri-Metal Shock Resistant Brazing bonds the carbide teeth securely to the blade body, absorbing impacts and preventing tooth lift under heavy cuts. This translates to consistent performance even when cutting through harder aluminum sections or encountering fixtures and fasteners.
Versatility for cordless and corded saws
Whether you’re wired to the shop or cutting on-site with a cordless saw, the D1060N is built to perform. Its 10" diameter paired with 60 teeth provides the balance of speed and control needed for non-ferrous metal work, without sacrificing edge quality.
Ideal use cases and practical tips
- Fabrication shops and field crews cutting aluminum extrusions, copper pipe, and brass plate—where clean edges and minimal rework matter most.
- Prototyping and tight-tolerance builds that require dependable edge quality without advanced deburring steps.
- Projects that demand consistent performance across a range of thicknesses, from thin skins to thicker profiles.
- For best results, maintain a steady feed rate and avoid forcing the blade; let the teeth do the work to minimize heat buildup and edge chatter.
With the Diablo D1060N, you gain a specialized aluminum-cutting blade that prioritizes precision, durability, and efficiency. It’s the smart choice when you need dependable, burr-free cuts on aluminum and other non-ferrous metals—and you want a blade that lasts through demanding jobs while preserving tight tolerances.
| Type |
Circular |
|---|