Freud LU88R010 10" Thin Kerf Fine Finish Crosscut Blade
MPN: LU88R010
Minimum order quantity is .
Maximum order quantity is .
The product can be bought in quantity increments of .
Meet the Freud LU88R010 10" Thin Kerf Fine Finish Crosscut Blade—a precision blade engineered to elevate every crosscut with cleaner edges and a smoother surface. Built for application versatility, this blade is ready to handle hardwoods, softwoods, and moldings with confident, repeatable results.
Why this blade stands out
- Perma-SHIELD™ coating enhances durability and reduces friction, giving new life to underpowered saws and maintaining sharp performance longer between sharpenings.
- Coated blades pull 1/3 less on the saw, translating into 33% more cutting power on demand—so you can push through dense materials without straining the motor.
- Thin kerf design removes less material than traditional carbide blades, meaning you’ll require less horsepower for the same result—fewer bogdowns and smoother finishes on delicate parts.
- Precisely engineered for fine finish crosscuts, delivering crisp corners and minimal tear-out on edges and moldings.
Who should use the Freud LU88R010
- Cabinetmakers and trim carpenters seeking consistently clean, edge-ready crosscuts on high-visibility face work.
- DIY enthusiasts tackling finish carpentry, crown molding, baseboards, and paneling who want professional-grade results without upgrading tools.
- Any project where smooth cut quality matters as much as speed—gives underpowered saws the bite they need.
Use cases and practical benefits
- Fine finish crosscuts on hardwoods for cabinetry projects, ensuring tight joints and minimal sanding.
- Softwood trim and molding, where clean edges reduce post-cut refinement and material waste.
- Panel cutting and decorative work where edge quality is critical to the overall look.
Tips for best results
- Let the blade do the work—with its thin kerf and low drag, maintain a steady feed rate to maximize the 33% cutting power improvement without forcing the cut.
- Keep your saw well-tuned and the blade clean to preserve Perma-SHIELD benefits and finish quality over time.
- Pair with a clean, sharp blade to minimize tear-out when cutting with moldings and veneer-thick materials.
Technical snapshot
- Model: Freud LU88R010
- Size: 10-inch blade
- Design: Thin kerf for reduced material removal
- Coating: Perma-SHIELD™ for durability and smoother cuts
- Application: Fine finish crosscuts in hardwoods, softwoods, and moldings
Description
Meet the Freud LU88R010 10" Thin Kerf Fine Finish Crosscut Blade—a precision blade engineered to elevate every crosscut with cleaner edges and a smoother surface. Built for application versatility, this blade is ready to handle hardwoods, softwoods, and moldings with confident, repeatable results.
Why this blade stands out
- Perma-SHIELD™ coating enhances durability and reduces friction, giving new life to underpowered saws and maintaining sharp performance longer between sharpenings.
- Coated blades pull 1/3 less on the saw, translating into 33% more cutting power on demand—so you can push through dense materials without straining the motor.
- Thin kerf design removes less material than traditional carbide blades, meaning you’ll require less horsepower for the same result—fewer bogdowns and smoother finishes on delicate parts.
- Precisely engineered for fine finish crosscuts, delivering crisp corners and minimal tear-out on edges and moldings.
Who should use the Freud LU88R010
- Cabinetmakers and trim carpenters seeking consistently clean, edge-ready crosscuts on high-visibility face work.
- DIY enthusiasts tackling finish carpentry, crown molding, baseboards, and paneling who want professional-grade results without upgrading tools.
- Any project where smooth cut quality matters as much as speed—gives underpowered saws the bite they need.
Use cases and practical benefits
- Fine finish crosscuts on hardwoods for cabinetry projects, ensuring tight joints and minimal sanding.
- Softwood trim and molding, where clean edges reduce post-cut refinement and material waste.
- Panel cutting and decorative work where edge quality is critical to the overall look.
Tips for best results
- Let the blade do the work—with its thin kerf and low drag, maintain a steady feed rate to maximize the 33% cutting power improvement without forcing the cut.
- Keep your saw well-tuned and the blade clean to preserve Perma-SHIELD benefits and finish quality over time.
- Pair with a clean, sharp blade to minimize tear-out when cutting with moldings and veneer-thick materials.
Technical snapshot
- Model: Freud LU88R010
- Size: 10-inch blade
- Design: Thin kerf for reduced material removal
- Coating: Perma-SHIELD™ for durability and smoother cuts
- Application: Fine finish crosscuts in hardwoods, softwoods, and moldings
Additional Information
| Type |
Default Title |
|---|
Freud LU88R010 10" Thin Kerf Fine Finish Crosscut Blade
$66.00
Default Title