Freud LU90M010 10" Thin Stock Non-Ferrous Metal Blade
MPN: LU90M010
Minimum order quantity is .
Freud LU90M010 10" Thin Stock Non-Ferrous Metal Blade is purpose-built for precision cutting of thin aluminum, brass, and other nonferrous extrusions. Its design delivers a consistently smooth, burr-free finish even on delicate stock, making it a reliable choice for fabrication shops, hobbyists, and professionals working with soft metals.
What sets this blade apart?
- High-tooth-count geometry paired with a -5° hook angle minimizes binding and ensures clean, effortless slicing through thin stock, extrusions, and profiles.
- Special carbide alloy with high impact strength specifically engineered for nonferrous metals, delivering long-lasting performance and dependable cuts in aluminum, brass, and similar materials.
- Premium cut quality produces smooth faces and sharp edges, reducing post-cut deburring and finishing time.
- Lubrication guidance to maximize blade life: Freud recommends applying a liquid lubricant (such as WD-40 or a similar spray) every 4–5 cuts to keep temperatures down and improve finish. Wax sticks are not recommended for nonferrous materials.
Ideal use cases
- Thin aluminum extrusions for framing, enclosures, and architectural applications
- Aluminum sheets and thin profiles found in HVAC, electronics housings, and lighting fixtures
- Brass and other nonferrous components where a burr-free edge matters for fit and finish
Why choose this blade over generic metal-cutting options?
- The combination of high tooth count and a -5° hook angle is optimized to prevent the chatter and binding common with soft metals, yielding straighter cuts with less effort.
- The specialized nonferrous carbide resists chip-walling and provides consistent performance across repeated light passes, which is crucial for thin stock.
- Designed to pair with lubrication routines that preserve blade life and cut quality, helping you maintain efficiency in busy workloads.
Practical tips for best results
- Always use a light to moderate feed rate to maintain a steady cut and prevent overheating.
- Keep a light spray of lubricant on the cut line—apply every 4–5 cuts as recommended—to reduce heat buildup and minimize galling.
- Avoid wax-based lubricants; stick with a suitable liquid spray designed for metalworking to preserve blade performance.
- Ensure proper blade alignment and secure clamping for thin stock to maximize edge quality and safety.
Upgrade your nonferrous cutting tasks with the Freud LU90M010 10" Thin Stock Non-Ferrous Metal Blade and experience cleaner finishes, reduced post-cut work, and reliable performance on aluminum, brass, and other soft metals. Ideal for professional shops and dedicated hobbyists who demand precision without compromise.
Freud LU90M010 10" Thin Stock Non-Ferrous Metal Blade is purpose-built for precision cutting of thin aluminum, brass, and other nonferrous extrusions. Its design delivers a consistently smooth, burr-free finish even on delicate stock, making it a reliable choice for fabrication shops, hobbyists, and professionals working with soft metals.
What sets this blade apart?
- High-tooth-count geometry paired with a -5° hook angle minimizes binding and ensures clean, effortless slicing through thin stock, extrusions, and profiles.
- Special carbide alloy with high impact strength specifically engineered for nonferrous metals, delivering long-lasting performance and dependable cuts in aluminum, brass, and similar materials.
- Premium cut quality produces smooth faces and sharp edges, reducing post-cut deburring and finishing time.
- Lubrication guidance to maximize blade life: Freud recommends applying a liquid lubricant (such as WD-40 or a similar spray) every 4–5 cuts to keep temperatures down and improve finish. Wax sticks are not recommended for nonferrous materials.
Ideal use cases
- Thin aluminum extrusions for framing, enclosures, and architectural applications
- Aluminum sheets and thin profiles found in HVAC, electronics housings, and lighting fixtures
- Brass and other nonferrous components where a burr-free edge matters for fit and finish
Why choose this blade over generic metal-cutting options?
- The combination of high tooth count and a -5° hook angle is optimized to prevent the chatter and binding common with soft metals, yielding straighter cuts with less effort.
- The specialized nonferrous carbide resists chip-walling and provides consistent performance across repeated light passes, which is crucial for thin stock.
- Designed to pair with lubrication routines that preserve blade life and cut quality, helping you maintain efficiency in busy workloads.
Practical tips for best results
- Always use a light to moderate feed rate to maintain a steady cut and prevent overheating.
- Keep a light spray of lubricant on the cut line—apply every 4–5 cuts as recommended—to reduce heat buildup and minimize galling.
- Avoid wax-based lubricants; stick with a suitable liquid spray designed for metalworking to preserve blade performance.
- Ensure proper blade alignment and secure clamping for thin stock to maximize edge quality and safety.
Upgrade your nonferrous cutting tasks with the Freud LU90M010 10" Thin Stock Non-Ferrous Metal Blade and experience cleaner finishes, reduced post-cut work, and reliable performance on aluminum, brass, and other soft metals. Ideal for professional shops and dedicated hobbyists who demand precision without compromise.
| Type |
Default Title |
|---|