Malco FSPC Standing Seam Panel Cutter, Cordless Drill-Powered Rip Cutter for Painted Steel, Stainless, Copper, Zinc and Aluminum

$1,586.55

MPN: FSPC

Brand: Malco
Barcode: 686046561752
Availability : Limited Stock Out of stock

Type: Attachments

Attachments
Add to Wishlist
<p style="color: red;">Minimum order quantity is .</p>
Maximum order quantity is .
The product can be bought in quantity increments of .

left in stock.

Malco FSPC

On many rip cuts, only one side of the panel is worth keeping. The Malco FSPC Standing Seam Panel Cutter leaves a clean edge on both sides of the cut, so both halves stay usable. Built for 1 in. or taller standing seam roofing panels, it cuts from either side at speeds up to 75 ft. per minute and handles up to 24-gauge painted steel, 26-gauge stainless steel and .032 in. copper, zinc and aluminum. Polymer drive wheels feed the cutter through the panel while helping protect painted finishes. The adjustable fence indexes off either panel rib and includes interchangeable 8 in. and 16 in. rails for straight, repeatable cuts with no chalk line. The FSPC runs on any lithium-ion cordless drill rated for a minimum 45 ft-lb of torque and a maximum 500 RPM. Replaceable cutting discs and drive wheels extend service life, and an IP67-rated hard case protects the system during transport and storage.

Specifications

Malco FSPC

•Keep Both Halves: Cuts up to 75 ft./min. with clean edges on both sides, so both halves of the panel stay usable.
•Cuts Premium Metals: Handles up to 24-gauge painted steel, 26-gauge stainless steel and .032 in. copper, zinc and aluminum.
•No Chalk Line Needed: Adjustable fence with 8 in. and 16 in. rails indexes off either rib for repeatable cuts on 1 in. or taller seams.
•Finish-Friendly Drive: Polymer drive wheels feed the cutter through the material while helping protect painted panel finishes.
•Drill-Powered: Runs on a lithium-ion cordless drill with 45 ft-lb minimum torque and 500 RPM maximum speed.
•Built for the Long Haul: Replaceable cutting discs and drive wheels plus an IP67-rated hard case; backed by the Malco Limited Lifetime Warranty.




Description

Malco FSPC

On many rip cuts, only one side of the panel is worth keeping. The Malco FSPC Standing Seam Panel Cutter leaves a clean edge on both sides of the cut, so both halves stay usable. Built for 1 in. or taller standing seam roofing panels, it cuts from either side at speeds up to 75 ft. per minute and handles up to 24-gauge painted steel, 26-gauge stainless steel and .032 in. copper, zinc and aluminum. Polymer drive wheels feed the cutter through the panel while helping protect painted finishes. The adjustable fence indexes off either panel rib and includes interchangeable 8 in. and 16 in. rails for straight, repeatable cuts with no chalk line. The FSPC runs on any lithium-ion cordless drill rated for a minimum 45 ft-lb of torque and a maximum 500 RPM. Replaceable cutting discs and drive wheels extend service life, and an IP67-rated hard case protects the system during transport and storage.

Additional Information
Type

Attachments