Semble bien mais pas reçu la bonne grandeur
Malco JCC75R REDLINE 3/4” J-Channel Cutter Notcher | .975 In. Knockout Width | 3/8 to 1-1/4 in. Notch Depth | Vinyl Siding Tool
MPN: JCC75R
Minimum order quantity is .
Maximum order quantity is .
The product can be bought in quantity increments of .
Malco JCC75R J Cutter
The Malco JCC75R J-Channel Cutter is your ultimate tool for precision cutting in any project. Crafted for both professionals and DIY enthusiasts, this cutter offers a seamless blend of functionality and comfort.
Key Features:
- 3/4-Inch Cutting Capacity: Designed to handle 3/4-inch J-channels with ease, ensuring clean and precise cuts every time.
- Soft Touch Grip: Enjoy enhanced comfort during use, reducing fatigue and allowing for greater control over your cuts.
- Unique One-Hand Operation Latch: Simplifies the cutting process, enabling you to operate the cutter efficiently with just one hand.
- Maximized Handle Leverage: The innovative design increases leverage, making it easier to cut through materials with minimal effort.
Why Choose the Malco JCC75R?
Whether you are working on home improvement projects or professional installations, the Malco JCC75R J Cutter stands out with its ergonomic design and superior cutting performance. Say goodbye to cumbersome tools that require two hands and embrace the ease of one-handed operation.
Upgrade your toolkit with the Malco JCC75R J-Channel Cutter and experience the difference in quality and efficiency!
Description
Malco JCC75R J Cutter
The Malco JCC75R J-Channel Cutter is your ultimate tool for precision cutting in any project. Crafted for both professionals and DIY enthusiasts, this cutter offers a seamless blend of functionality and comfort.
Key Features:
- 3/4-Inch Cutting Capacity: Designed to handle 3/4-inch J-channels with ease, ensuring clean and precise cuts every time.
- Soft Touch Grip: Enjoy enhanced comfort during use, reducing fatigue and allowing for greater control over your cuts.
- Unique One-Hand Operation Latch: Simplifies the cutting process, enabling you to operate the cutter efficiently with just one hand.
- Maximized Handle Leverage: The innovative design increases leverage, making it easier to cut through materials with minimal effort.
Why Choose the Malco JCC75R?
Whether you are working on home improvement projects or professional installations, the Malco JCC75R J Cutter stands out with its ergonomic design and superior cutting performance. Say goodbye to cumbersome tools that require two hands and embrace the ease of one-handed operation.
Upgrade your toolkit with the Malco JCC75R J-Channel Cutter and experience the difference in quality and efficiency!
Additional Information
| Type |
Pliers and Cutters |
|---|---|
| Quantity |
Single |
Malco JCC75R REDLINE 3/4” J-Channel Cutter Notcher | .975 In. Knockout Width | 3/8 to 1-1/4 in. Notch Depth | Vinyl Siding Tool
$62.92
Pliers and Cutters / Single
Customer Reviews
Overall rating: 3.3 / 5 from 39 reviews.
I have a 7/8" J-cutter that is about 20 years old. love it but needed a 1" cutterI like the new lock mechanism and the etched gauge is nice but my oldie has an adjustable stop that was nice so I didnt have to even look at the cutter when working my miters.overall its made well and functions great.
They break more j channel than it’s worth! Side cutters and razor knife is all you need.
Tried to knotch 1 inch trim took too much effort for its intended use
All good thanks
does not always work like it should - frequently cracks the channel
I should have read the reviews before buying or at least tried these before the return window closed. As many others have mentioned these are too wide to work on standard 3/4" J channel, and now I'm out 50 bucks on a tool I will never use.
Sure helped speed things along!!
Product description is totally wrong.Advertised as 3/4” but actually 1” across.Of course we can return it and exchange but why waste everybody’s time and resources.Do Malco not even know what they are selling under this description?
This is perfect for 1" J Channel, very clean cut and bends, an absolute time saver
Great if you do much siding, especially with lots of windows, highly recommend
This brand is excellent in all tools I had been purchased
Does not work for 3/4" J channel. This cutter is 1", returned and purchased 5/8" cutter. The 5/8" J channel cutter is the one you will need for 3/4".
Easy to use and makes cutting J channel easy. Speeds the process right up when your installing and attaching pieces.
I didn't know they even made these cutters.I
These are very well built, easy to lock, easy to use. My only real issue is that the notches on the unit are not marked, as one might expect to make the correct cut depths desired. I located the notch mark I wanted using trial and error, and then colored it in with a Sharpie.I understand that there are variations of vinyl formulations and quality and that the tool needs to work with all permutations to be a success. If your J channel is breaking the tab completely out or putting stress cracks between the end of the cutting end points when you are attempting to just notch the J channel like me, here is how I solved it.Insert the tool into the J channel to the depth you want, slightly clamp down on the J channel, release the vinyl from your hands so the vinyls weight is only held by the tool. Squeeze the handles until it completes the first notching action. This seemed to be the only way I could get it operate for me. I was using 3/4 J channel from Certainteed.When the tool works, it saves you a lot of hassle trying to make clean cut or notch in of J channel with snips.
I had the same problem as everyone else .... why would I pay top dollar for a too that states it’s for 3/4 “ “J” channel only to get it and find it is made for larger trim .... the Malcolm tools I have bought are excellent quality ... too bad their product description is so useless .... $ 48.00 waste of money.... very poor description!!!!!!
1” is how wide the bottom of 3/4 j channel is and 3/4 is how wide the bottom of 5/8 j is. It’s not the cutters are wrong it’s that everyone Is measuring the j in the wrong spot. Read the back of the j or measure it in the right spot. You Have to measure where the hem is. Not the base.
not 3/4inch as listed they are for 1 inch jtrim
These are really great tools. MALCO has a solid name and reputation.
They gotta get this measurement thing correct. Seems there's alot of confusion. Just did not fit into 3/4" j channel trim. Had to return.
Normally I love this brand, they make great tools. This one just doesn't work. It is easier to use a regular snips and leaves a cleaner cut.
Ordered the 3/4 is 15/16 wide will serve the purpose. But could be engeneered with a stop for drain tab cuts. Overall good tool
The description said 3/4”. Received a 1”. Requested a replacement. We will see if it is correct.
Works as expected
Worked awesome on my siding job, made trimming around the windows very easy
Tool was of excellent quality and worked flawlessly.
I read some reviews prior to purchasing and thought they may be in accurate. Although it says for 3/4 J trim, it does measure 15/16" and is extremely difficult to make it work in my 3/4" J trim.It does cut very nicely, and very tight, but definately not like the videos i watched on linePerhaps the 5/8" cutters would be a better choice, especially if they are a bit larger than these ones as well.
Why doesn't this company hire a real ad person to put their ads together. These tools only work on j-channel they are made for. I wanted 3/4" cutter and yet in all of the ads for this brand product not a single one of them tells you what size channel it is made for. Since this product number has 75 in it I ordered it.
Bought these in winter. Just discovered they are not for cuttin j as discribed but for trimming drip cap for j to fit into. Big loss of cash fir something so misleading.
Not being a siding expert, I assumed that 3/4 of inch must be for 3/4 inch j channel. This item at least the one they sent me measures a full one inch. All of this is a bit misleading, the j cutter was marked JCC75R but does measure out to be 1 inch, I have ordered a 5/8 model to see if that works. I am sure the tool deserves a 5 star but the description deserves only 1, again it is misleading at least for us laymen.
Only because the description leaves a bit to be desired. For 3/4 inch one needs the 5/8 tool.However I returned it to Amazon for full credit and purchased the correct one.
thought everything was very good
Easy to use.
They work but not perfectly. Takes some getting used to make clean cuts and bends. better off saving your money and using a razor blade knife.
If you are looking into buying a J-Cutter for the first time just click the buy now and you can thank me later. Malco is THE well-respected brand in our industry for siding hand tools.
Love this tool....it takes a little time getting used to it but once you do, you will love it.
Just what I needed doing a home improvement vinyl siding project ThanksAmazon had the best price for the same item by others
I wasn't sure what size cutter to get (first time sider) so I measured the j channel I'm going to use. It is exactly 3/4" inside the channel from side wall to side wall. When I tried to insert it into the j channel I discovered the cutter was too wide. There is nothing wrong with it and I'm sure it would work well. I ordered the same thing but 5/8" wide.