Malco VCB2 EV 10 in. Vinyl Siding and Fencing Cutting Circular Saw Blade

Name: Malco VCB2 EV 10 in. Vinyl Siding and Fencing Cutting Circular Saw Blade
Brand: Malco
SKU: 574-VCB2 EV
Price: 36.46 USD
Availability: InStock
Rating: 3.5 (34 reviews)

$36.46

Malco VCB2 EV

Malco's VCB2 EV 10" (254 mm) Circular Saw Blade is designed for a greater range of cutting applications including vinyl siding and vinyl fence posts and rails. A flat ground, neutral, no-hook-angle, 248-tooth configuration and nominal .073" (1.85 mm) blade thickness generates less waste and ensures a consistent ultra-smooth cut with less pull into the vinyl material. The large 10" (254 mm) diameter provides a deeper, more efficient blade path for fast cuts in wide siding panels and more accurate single pass cuts in large profile vinyl fence posts. Cutting operation is optimal at 6500 RPM within a wide temperature range of 100-degrees down to 20-degress Fahrenheit. The VCB2 EV fits most power miters for making ultra smooth cuts.

Ask a Question

Brand: Malco

Barcode: 686046538976

Availability : In Stock Pre order Out of stock

Specifications
Description
Additional Information
Reviews

Specifications

Malco VCB2 EV

•Large 10" (254 mm) diameter provides a deeper, efficient cut in a variety of applications
•Blade thickness generates less waste and ensures a ultra smooth cut
•Fits most power miters for making ultra smooth cuts

Description

Malco VCB2 EV

Additional Information

Type	Circular
Material	Multi-Use
Size	10 in.

Reviews

Phyber

Made perfect cuts in textured vinyl siding.

Bil

It’s works

gerry

Center hole too small to fit my compound miter saw ... return window Closed NOT HAPPY !!

Dennis Mitchell

Bought this prior to getting my siding. The blade cuts nicely, little bucking, but leaves molten plastic residue on siding that needs to be cut off siding.Certainteed box recommends 40 tooth carbide blade on the box.

martin aubin

fait de très belle coupe dans le revêtement de vinyle

Amazon Customer

I'm installing a vinyl fence and needed to rip its panels. I mounted this blade on my table saw and the first cut looked like a snake- ruined the panel. From then on out I took closer notice during the cut and when the blade would vibrate I would stop the cut, back off a bit, then keep going. The blade is so thin it flexes/vibrates and cannot cut straight until you stop cutting then start again. I would have given 1 star but thought maybe it's okay in a miter saws. If you plan on ripping vinyl or plastic get an aluminum/plastic cutting blade that has carbide teeth.

Doc

Was tight on arbor shaft made changing very difficult. Also heated up and warped very quick. Got a Irwin blade worked twice as fast smooth cuts no problems

randy

works as advertised cuts vinyl no problem clean cuts

gilles bélanger

Fait le travail

Amazon Customer

I am building a new home so I bought one of these blades for my chop saw. Complete the vinyl siding with a single blade and carried on with installing 1400 sq ft of Vinyl Plank Flooring. She started getting pretty dull but managed to get through to the last 100 sq ft or so which I finished with my jig saw. So this is the second blade the other hit the dust bin. Have not used this one but expect the same performance as the first!

Vicki Smith

Works great!

Ginger beard

Far out done my expectations

Danny Wong

If you're doing any type of vinyl siding, you need to invest in a vinyl siding blade. Cuts are quick and clean.

A Rutley

i was skeptical in purchasing this blade for cutting siding, it actually works great. not recommended in cutting siding below 5 degrees C used in cutting 30 boxes of siding.

Amazon Customer

As described

Carl

Made nice clean cuts on the vinyl siding and trim that I used to re-side my home.

Amazon Customer

GOOD product !

The Tech Guy

This blade is inexpensive and works well for cutting vinyl siding.The arbor hole on the blade is very tight and needed some coaxing to slide onto my Bosch saw. Make sure you look at the Rotation arrow on the blade and install it in the correct orientation. You will notice the teeth on the blade are backwards from a normal wood blade.The kerf if this blade is very thin which makes the blade wobble slightly. The wobble is not enough to ruin your cuts but the blade will flex slightly with any side pressure.Overall this blade is cheap and does the job. I installed 800 sq/ft of vinyl siding and cut several pieces without chipping or cracking any. For under $30 I'd recommend this blade however I'd pay $50 if they'd make if a little more sturdy.Note: I only used this blade for one weekend, installing siding on my cabin at the lake. For my "Small Project" it worked well. I have no idea on the longevity of this blade and how long the teeth will stay sharp.

Pam L

Wish I had read the reviews before buying. Yes, It's worthless junk, Couldn't get the 5/8 arbor hole onto the arbor. After messing with it for a LONG time, we finally got the blade installed only to find the blade is so out of true, or warped. Don't waste you money

Amazon Customer

just don't cut wood even once with this blade it will ruin it fast (ask me how I know) :-(

Dave W

Worked well but was not 100% true. Had a slight wobble.

Amazon Customer

Absolutely worthless. Blade was warped when I got it and it chipped and cut worse than the dull carbite tipped blade I was using. Don't waste your money on this.

Tony

Great blade...have gotten lots of use out of it and it still works great!

Daniel B.

This blade warped in no time at all. I used it to cut .06 polymer so I did not put a strain on it. Didn't matter, this blade still warped.

Dennis S. Getz

The blade had a slight wooble to it and really didn't cut any better than a plywood blade. Sort of disappointed with it.

Clarence Dunnrowicz

arrived bent, no quality control

Tim Traczyk

Piece of crap. Blade is warped. It did cut though.

Alex

Not working

joshua turner

works well

marodo

working as expected.

Cuts through vinyl like cutting through warm butter! You'll love it.

Matthew J Warren

The blade arrived with quite a wobble when installed on saw. Inspite of the wobble the blade cut siding nicely.

glenn mclellan

Perfect blade for cutting vinyl siding. Never chipped any siding when cutting. Too bad it wasn't a larger blade. Very smooth cuts.

Caveat

Good idea, but the blade I received was about 1/8" out of true. What that means is, when mounted in a saw, the blade wobbled about 1/8". I used an 80 tooth blade, mounted backward in the saw and I am returning this Malco blade. I cannot recommend this blade.

Featured Categories

Malco VCB2 EV 10 in. Vinyl Siding and Fencing Cutting Circular Saw Blade

Type: Circular

Material: Multi-Use

Size: 10 in.

INFORMATION

INFORMATION

ABOUT USA TOOL DEPOT

Get in touch

FOLLOW US ON SOCIAL MEDIA

FOLLOW US ON SOCIAL MEDIA