Simpson DHU2.37/14 DHU Face-Mount Drywall Hanger for 2-5/16 in. x 14 in. Engineered Wood with SDS Screws

Simpson Strong-Tie DHU2.37/14

•DHU hangers in widths of 2-1/2 in. or greater may be ordered with one flange concealed
•Available for order skewed up to 45°
•Testing verifies that the DHU hangers do not reduce the two-hour fire wall assembly rating in either 2x4 or 2x6 walls
•DHU fire wall hangers are code listed for structural use under ICC-ES ESR-2552
•Hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01
•If hangers are installed on both sides of the wall, then it must be a 2x6 wall
•Seat width: 2-3/8 in.
•Height: 13-15/16 in.
•Made from 12-gauge steel
•Galvanized (G90) for extra corrosion resistance

Simpson Strong-Tie DHU2.37/14

Engineered and tested to perform, Simpson Strong-Tie hangers are manufactured to the highest quality standards for structural strength and safety. DHU face-mount hangers are designed to carry joist floor loads to a wood stud wall over two layers of 5/8-in. gypsum board (drywall). These hangers install after the drywall is in place.