Simpson Strong-Tie MBHU5.50/11.25KT MBHU 5-1/2-in. x 11-1/4-in. Galvanized Masonry Beam Hanger with Screws/Anchors

$219.33

MPN: MBHU5.50/11.25KT

Barcode: 707392870005
Availability : Limited Stock Out of stock

Type: Hanger

Hanger
Add to Wishlist

Minimum order quantity is .

Maximum order quantity is .
The product can be bought in quantity increments of .

Simpson Strong-Tie MBHU5.50/11.25KT

The Simpson Strong-Tie® MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.

WARNING! This product can expose you to chemicals including wood dust which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Specifications

Simpson Strong-Tie MBHU5.50/11.25KT

•Carbon-steel Titen HD is not recommended for exposed exterior applications
•Provide moisture barrier between beam and wall per jurisdictional requirements
•Seat width: 5-1/2 inches
•Seat height: 11-1/4 inches
•Made from 10-gauge steel
•Galvanized (G90) for corrosion resistance




Description

Simpson Strong-Tie MBHU5.50/11.25KT

The Simpson Strong-Tie® MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® screw anchor and Strong-Drive® SDS Heavy-Duty Connector screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.