Ben R.
Works as expected. Good quality.
Douglas Mwesigye
Very pleased with these. Still made in the US and very well ground and finished. Inside surface of the jaws is pretty flat and parallel, just a very minor gap (really good for a forging). I wish they made a pair of these just a big smaller for off-label hobby/utility use. Decided to get these over the pretty-good Titan model and it was definitely worth the extra cost, really quite a good value.
Aarti Mukhopadhyay
Lifesaver for cerclips or snap rings without holes. For DYI mechanics.
Refiloe Collins
Work perfectly
Conner Kihn
Work great for compression snap ring removal and instalation.
thandi Jansen van Rensburg
Ok
Cherechi Agnes
Tool works as expected.
Tebogo Morgan
These are a solid set of snap ring pliers. Great quality.
Dolores Rwabyoma
great for heavier duty clips like those found in t cases
Blanche Murray
This worked great the first time I used it on my Land Cruiser snap ring inside the transfercase. Now, working on my F250 the tip snapped off. Disappointed for sure.
Ajinkya Khan
First of all, you can tell by the feel that these are a well-made pair of pliers. I needed them to remove the retainer clips from a 99 4Runner axle. The pen style retainer pliers that I had on hand just would not do the job. I struggled for about an hour trying to remove just one clip, did some research, and discovered these pliers. After they arrived, I was able to remove the rings in a matter of seconds. Well worth the price to reduce the aggravation.I would say that I would order them again, but the way these are made, they will probably last longer than I will.
Tiara Bartoletti
 Nice quality. Honestly wouldn't surprise me if snap-on or matco rebrands them and sells them for $120. Definitely not $1.50 each in bulk from China quality. There's some apparent thought and pride that went into designing and manufacturing these.It opens smooth and controlled even on the stiffer clips with very little torsional flex. I love the dimples for extra stability. Helps a lot when you have a long spline shaft to clear.Bottom line is if you're searching around because you need this style snap ring plier just stop now and buy it. Stop wasting your time browsing, you have arrived at what you were looking for. You're welcome.
Bernard Barnard
THESE ARE MADE IN THE USA. They need to put this in the description.....This is one of those tools that you wish you would have bought years ago! These save you so much time and frustration, not to mention bloody knuckles. They are worth their weight in gold. These are heavy duty and very well made. Stop thinking about it and just buy it already. EXCELLENT PRODUCT!
Ben Nabimanya
As specified and works well
Grace Taylor
Nice well built tool. Had to grind the jaws a bit for an application but, nice in the hand, no flex.good addition to any shop toolbox.
Kim Myburgh
Worked very well for my project.
Maximo Skiles
I was rebuilding a transmission and needed some snap ring pliers, the old ones I had kept slipping. These have little grooves to hold the ends of the snap rings and the handles are long enough to exert steady pressure.
Howard Ward
Securely releases the lock ring holding on the tail housing of a 727 transmis
Harrison Smith
These things are an absolute dream. They made tear down of a NP231J a burzzz.....
Clementina Leffler
worked perfectly for getting the clip off of the inboard side CV joint on a 4th gen 4Runner. $37 is a lot to spend on a tool I'll use a few times in my life but that's what we do, right?
Joshua Baker
The transfer case on my truck went out. Went to take it apart, and I needed this tool. I messed around with cheap local parts store pliers, made something work, but it was a hassle. After looking at some forums, someone mentioned this pair.I ended up buying them AFTER the fact lol. So I have not used them yet. But they do feel solid, and are US made IIRC. I’m nowhere near my toolbox to double check.I wish I would have purchased these from the get go!
Freddie Hill
accurate; hardened
Mike Bugala
Use this primarily when dealing with c clips on CV axles or rebuilding manual hubs. It hasn’t let me down and is a good size for my hand.
Lexi Shaw
I use these as "innie" pliers instead of their intended use. I mainly use them for removing hydraulic plungers from tappet bodies. They work great, the spring is nice and strong, and they feel like they were built tough. My co-worker has been using a pair of these for decades and they still work like my brand new ones, if that is anything to go by for durability.
Tanya White
Well built tool. I have used them to pry various things apart beside snap rings. The long handles provide good leverage.
Moses Mbabazi
These are great external jaw pliers, good quality!
Myah Stracke
Good solid built tool. Feels good in hand. Function is fluid in its movement. Awesome tool for the price.
Mohanlal Maheshwari
Needed to remove and replace several snap rings on a transmission rebuild, this tool helped greatly!
Falguni Mathai
Good reverse pliers
Ethan Adams
Very sturdy and thick so they won't break easily and good price
Gary Watson
I bought these for a slip yoke eliminator install on a jeep. There are some pesky retaining rings with no holes for standard snap-ring plyers and these worked great. There is a knurled finish on the blades that held the clips well and the long handles give you a lot of power for thicker rings. Overall I am very happy with this tool, it made what could have been a frustrating experience very easy. These seem to be well made and I am very happy with them.
Eula Ortiz
You squeeze, the metal thingy goes ping and flies across the shop hitting Earl in the eye.
Jake Phillips
I purchased these to install a lock ring on a crankshaft of a VW Type 1 Engine. The ring retains the gears on the front of the crank but does not have any holes like a usual snap ring. These grabbed the end of the retaining ring and opened it up to get it over the end of the crank and into the groove it sits in. Worked well and will be used again on my next engine build. Might also work with other applications where a retaining ring needs to be expanded. May also work for piston rings but have not tried it for that.
Jackeline Hills
Just what I wanted
Marlee Welch
Look and feel sturdy, large wide grip for larger c clips. Tip has toothed surface for secure grip on c clips and horseshoe clips.
Kubura Samuel
As expected, a high quality tool.
Gaetano Mukalazi
working on my dodge ram transfer case chain removes all c rings very eazys
Aaron Cook
These are exactly what was needed to do the job. Works perfect for motorcycle flange clips.
Arthur Bamwiine
Had to remove some Jeep split rings with no hooks on them. did the job, perfect
